Dispersing Agent

Saura Solve - HV

INTRODUCTION

DISPERSING AGENT FOR VAT, PIGMENT & DISPERSE DYE APPLICATION

1. Improves dispersion of the dyebath.

2. Improves depth & brightness of the dye

3. Prevents dyestuffs agglomeration and its re-deposition on fibre during dyeing.

4. For VAT dyes it acts as a weighting dispersing and hydroscopic agent for dying and printing, improves print paste stability and storage, acts as a promoter for fixation, improving the yield, levelness and penetration.

1. Physical Appearance : Light creamish free flow powder

2. Chemical Nature : Condensation product based on monobenzyl – dibenzyl sulphanilate

3. Solubility in water : Good

4. pH : 7-8

5. Stability to Acid / Alkali : Good

6. Storage Stability : Good

[Room Temperature 35 degree C]

(INFORMATION PROVIDED HERE IS IN GOOD FAITH, TO THE BEST OF OUR KNOWLEDGE

AND WITHOUT LIABILITIES)

TECHNICAL INFORMATION:

TEXAMOL WT is a sodium salt of Beta Naphthalene Sulphonic Acid Fomaldehyde condensate.

SPECIFICATION:

Appearance : Pale brown powder (spray died)

PH of 1.0% solution in water : 7.0 to 7.5

Active matter : 80% minimum

Moisture content : 3.0 to 5.0 %

Ionic nature : Anionic

TEXAMOL WT is, a powerful dispersing agent, used in dyeing of natural and synthetic fibers to produce speck free level dyeing. TEXAMOL WT is an efficient dispersing agent for use in dyeing o polyester fibers/fabrics with disperse dyestuffs. It is ideally suited for HTHP dyeing of polyester fibers/fabrics with disperse dyestuffs. The recommended concentration is 0.5 – 1.5 g/l in the dye bath. TEXAMOL WT can also be used as protective colloid in-

• Vat acid process with Vat dyestuffs

• Acetate rayon dyeing with Acetate dyestuffs

• Indigosol (Solubilised Vat) dyeing

• Polyamide dyeing with disperse / acetate dyestuffs

• Naphthol dyeing

PESTICIDES FORMULATION: Use of TEXAMOL WT in WDPs facilitates and accentuates dispersing, emulsifying, spreading and soluilising properties of the formulations. It also imparts good wettebility and low foaming characteristics. It is compatible with other ingredients normally used in formulations of WDPs.

STORAGE: Very slightly hygroscopic and tends to absorb moisture from atmosphere.

SAFETY: Combustible, keep away from any source of fire.

(INFORMATION PROVIDED HERE IS IN GOOD FAITH, TO THE BEST OF OUR KNOWLEDGE AND WITHOUT LIABILITIES)